Quality Management (ISO 9001)
The Quality Management module supports the requirements of ISO 9001:2015, covering the core processes of a Quality Management System (QMS).
Go to Menu → Quality.
29.1 Document Control
Repository of QMS documents with a controlled lifecycle.
| Field | Description |
|---|---|
| Title and version | Unique identification of the document |
| Type | Procedure, Work Instruction, Record, Policy |
| Status | Draft → Under Review → Active → Obsolete |
| Approver | Person responsible for formal approval |
| Review cycle | Frequency in months (e.g. 12 months) |
| Next review | Automatically calculated date |
Active documents with an overdue review generate alerts on the dashboard. Obsolete documents are archived and do not appear in searches by default.
Go to Document Control.
29.2 Customer Complaints and CAPA
Recording and handling of customer complaints with root cause analysis and a corrective action plan.
Complaint flow:
- Receipt: channel (email, phone, portal), customer, description of the problem
- Analysis: category, severity, root cause identified
- Action Plan: corrective actions with owner and deadline
- Verification: confirmation of effectiveness after implementation
- Closure:
Closedstatus with resolution date
Go to CAPA Complaints.
29.3 Equipment Calibration
Management of the calibration schedule for equipment and measuring instruments.
Each record includes:
- Equipment and serial number
- Date of last calibration and calibrating body
- Date of next calibration (calculated from the interval)
- Result (
Pass / Fail / Out of Service) - Calibration certificate (upload)
Equipment with overdue calibration or calibration expiring within 30 days is highlighted on the dashboard. The system generates automatic tasks for the owner.
Go to Calibration.
29.4 Supplier Audits
Programme of ISO 9001 audits of critical suppliers, with a compliance checklist.
Each audit records:
- Supplier audited and scope (products/services covered)
- Date and audit team
- Compliance checklist against ISO 9001 requirements (by clause)
- Non-conformities identified and action plan
- Status (
Planned / In Progress / Completed) - Compliance score (%)
Go to Supplier Audits.
29.5 SPC Control Charts
Statistical Process Control: statistical monitoring of processes to detect deviations.
Supported chart types:
| Chart | When to use |
|---|---|
| X-bar | Control of the mean of a continuous process |
| R (Range) | Control of the range (process variability) |
| p (Proportion) | Control of the proportion of non-conformities |
How to use:
- Create a chart for the process to monitor (e.g. delivery time, defect rate)
- Enter subgroups of measurements periodically
- The system automatically calculates the LCL, UCL and the centre line
- Points outside the control limits are flagged in red
Go to SPC Charts.
29.6 CAPA 8D
Corrective and Preventive Action, 8 Disciplines: a structured problem-solving methodology.
The 8 disciplines:
| # | Discipline | Description |
|---|---|---|
| D1 | Team | Forming the multidisciplinary team |
| D2 | Problem | Detailed description of the problem |
| D3 | Containment | Immediate actions to limit the impact |
| D4 | Root Cause | Root cause analysis (5 Whys, Ishikawa) |
| D5 | Corrective Actions | Selection and planning of permanent actions |
| D6 | Implementation | Execution and validation of the actions |
| D7 | Prevention | Updating procedures and standards |
| D8 | Closure | Recognising the team and lessons learned |
Each discipline has its own text field; the root cause (D4) and the preventive action (D7) are those of the CAPA itself.
Go to Quality (ISO 9001) (CAPA 8D tab) or to CAPA 8D.