EterShieldDocs
etershield.com
PTLog in
Guide/Get started

Getting Started

Accessing the platform

Go to https://www.etershield.com and sign in with your credentials. The platform has no demo mode and no authentication bypass: all access is through a real account, using one of the following methods:

  • Email + password, with MFA (authenticator app) mandatory or optional depending on the organisation's policy (see section 19, Security tab). The email must be confirmed (see "Confirming your email and sign-in limits", below)
  • Google OAuth
  • SSO via Authentik (OIDC): Eter Growth corporate single sign-on
  • SAML 2.0 (enterprise SSO, configured by the tenant administrator)

The /demo and /demo-accept pages are only a demo request form (waiting list). They are not a way to access the platform without credentials.

Confirming your email and sign-in limits

Email confirmation. After you create your account, EterShield sends a message with a confirmation link. Until the email is confirmed, signing in with email and password does not work and shows the notice "Confirm your email" with a Resend email button. The sign-up page shows "Account created, email confirmation pending".

  • The link is single-use and expires after 24 hours. It opens an EterShield page that confirms with one click, so opening the link in an email reader or link checker does not use it up.
  • Resending the email invalidates the previous link. Only the latest one works. If you request two emails in a row and click the first, you see "Link already used": use the latest one.
  • After confirming, you see "Email confirmed" and you can sign in. The other possible notices are "Invalid confirmation link" and "Confirmation link expired", both with a button to request a new email (just type your email in the form field).
  • Requesting too many confirmation emails in a row shows "You requested too many emails. Wait a moment and try again."

Signing in with Google, Microsoft, GitHub or Apple. The GitHub and Apple buttons only appear if your organisation has enabled them in EterShield. With GitHub the primary email of the account is used, as long as it is confirmed; with Apple, if you choose "Hide my email", you can only sign in if you already have an EterShield account with that hidden address. When you link one of these providers to an account that had a password, the password stops being valid, open sessions end and you receive a warning email (you can set a password again through recovery). If something prevents the account from being linked, a notice explains why: "Email not confirmed by the provider" (confirm the email in your Google, Microsoft, GitHub or Apple account), "Account domain does not match" (sign in with your organisation's account), "Could not link the account" (an EterShield account with that email already exists and has not been confirmed: sign in with email and password, confirm the email and try again) and "Account already linked to another identity" (for security, only one identity from each provider can be linked to an account).

Sign-in limits. To block attempts to guess a password, EterShield limits attempts: 30 per IP address in 15 minutes, 10 failures per email and IP address in 15 minutes, and 50 failures per email in one hour from any source. When a limit is reached you see "Too many attempts": wait 15 minutes and try again, or use "Forgot your password?". The block is temporary and lifts by itself. Only wrong passwords count (a successful sign-in resets the counter).

SSO and the second factor. If you sign in through your organisation's identity provider, you skip EterShield's own second factor only if that provider proves you used MFA in that session. Microsoft Entra and Authentik send this proof when the user did MFA, and SAML accepts a multi-factor authentication context (a plain protected password does not count). Google never skips the second factor. Without proof, EterShield asks for the second factor (and its enrolment, if the organisation's policy requires it) on your first SSO sign-in. The organisation administrator should make sure their provider sends this information.

Recovery codes. When you enable the second factor you receive 12 single-use recovery codes, which replace the second factor if you lose access to your authenticator app. You can download, copy or print the list. To enable the second factor with an authenticator app, EterShield first sends a code to the account email, which you must enter in addition to the app code; when you finish, you receive an email saying it was enabled. If you already have an active factor, you must turn it off (with a current code) before setting up another. Each app code can only be used once. In Settings, Security you can see how many codes remain and click Generate new codes (this asks for the current code from your authenticator app). The previous codes stop working as soon as the new ones are generated.

End of the demonstration (blocked organisation)

Demonstration and trial accounts (TRIAL plan) have an end date. When that date passes, the organisation is blocked:

  • when signing in (email and password, Google, SSO or SAML) you see the "The demonstration period has ended" screen, which says that your data stays stored and gives the sales contact to keep using EterShield, with a Sign out button;
  • people who already had a session open are taken to the same screen within about a minute;
  • the organisation's API keys and SCIM tokens stop working;
  • every day at 06:35 UTC the platform sets the organisation to Suspended and records the change in the audit log.

The trial-end emails (the notice about 3 days before the end and the notice that it has ended) go to all active administrators of the organisation, each in their own language.

The same screen appears, with another title, when the organisation is suspended ("Access suspended") or cancelled ("Account cancelled"). There is no self-service activation after the demonstration ends: you need to talk to Eter Growth. A user whose home organisation is blocked cannot sign in, even if they have active external memberships in other organisations.

Initial onboarding

In your first session, EterShield shows an onboarding banner with 5 recommended steps (each with its own action button and the progress "n/5 completed"):

  1. Set the organisation name (Configure)
  2. Enable at least one compliance framework (View frameworks)
  3. Complete the first assessment (Do assessment)
  4. Create the first security policy (Create policy)
  5. Invite a team member (Invite)

You can follow these steps in the suggested order or explore the modules freely.

Entity selector (context)

At the top of the sidebar there is an entity selector. When it is set to "All entities", you see aggregated data for the whole organisation. When you select a specific entity, the whole platform filters to that context.

If the selected entity is a parent entity (see section 3, "Groups and subsidiaries"), the view becomes consolidated: it also includes the data of its subsidiaries.

Switching organisation

Your account can belong to more than one organisation, for example if you are a consultant supporting several clients, or if you have been invited to another company's organisation. In that case, the top bar (next to the logo) shows the name of the active organisation followed by an arrow ( ):

  1. Click the organisation name. This opens the "Switch organisation" list with your organisations and your role in each one (your home organisation is marked "your organisation"; the active one has a marker).
  2. Choose the organisation you want. The platform reloads on that organisation's dashboard.

If you have only one organisation, the top bar shows just the name, with no selector. When an Eter super-administrator is providing support to your organisation, the top bar shows the PRIVILEGED ACCESS label.

The top bar, the menu and search (⌘K)

The application has the same light design in both views. On the left is an icon column (each module's name appears on hover) and, next to it, the section menu. At the top, the top bar has, from left to right: the logo (or your organisation's brand logo, if it has white-label), the organisation, the active entity, the current page, the View switch (Manager or Consultant), search, the crisis mode button, the notification bell and the user menu.

  • Search (⌘K or Ctrl+K). Opens the command palette: type at least 2 letters to search risks, policies, incidents, controls and assessments, or to jump to any page your role can access.
  • Entity selector. In the top bar (and in the menu drawer on mobile). Administrators also see "All" and "Manage entities"; other roles only see it when the organisation has more than one entity.
  • Appearance. The light theme is the default. In Settings, Appearance (and in the user menu) you choose the theme: System (follows your device), Light or Dark, the latter when dark mode is available in your installation. The choice is saved in this browser. The old themes (Terminal Light, Chronicle and Forest) have been retired.
  • Mobile and narrow windows. The menu opens in a drawer and the icon column stays in place.

Two views: Manager and Consultant

The View switch in the top bar toggles between two ways of seeing the same information. It does not change what each person can do: permissions still come from the role (Admin, Manager, Viewer, etc.).

  • Consultant view (default). For people who handle day-to-day security and compliance work. The menu has the five short groups and, at the end, the collapsible More group with all the technical pages. Names are technical (Gaps, Cross-framework coverage). The dashboard shows all indicators and charts. Vera is a floating button with the ⌘J (Ctrl+J) shortcut. The AI report is called AI Executive Report.
  • Manager view. For people who decide and want the essentials in plain language. The menu has only five short groups: Overview, Compliance, Risks, Governance and Third parties. Names are simple (What is missing, How you are protected, Rules you meet, Checks, Past issues, Remediation plan, Waiting for you). The dashboard is a summary: the compliance score, the things that need action this week (pending CNCS notification, missing protections, overdue tasks, expired policies), your tasks and the calendar; the detailed numbers open under See details. Vera is an icon in the icon column (the floating button is hidden). The AI report is called Summary for management.

Your choice is saved for your user during the browser session; when you sign in again it returns to the default view (Consultant). Some screens (for example, the AI provider and storage card in Settings) use simpler words in the Manager view.

Organisations of which you are an external member. When the active organisation is not your home organisation, the name is followed by "(EXTERNAL)". To enter an organisation as an external member:

  • your account must have the second factor (MFA) enabled; otherwise the organisation appears unavailable, with the message "Enable the second factor on your account to enter";
  • the second factor must have been confirmed in this session. If you signed in with email, password and MFA, it is already confirmed. If you signed in through SSO, the platform opens the "Confirm the second factor" window and asks for the code from your authenticator app (or a recovery code) and only then lets you in;
  • the organisation must accept external members; otherwise the message "This organisation does not accept external members" appears.

Tables and lists

All lists in EterShield look the same: thin, dense rows, a grey header, the row under the cursor highlighted and the selected row with a light blue background. In lists with many rows (for example Risks or the logs) you can sort by a column by clicking its header, search, filter, change page and select rows with the box on the left. Identifiers, references and codes use the same typeface as the rest of the text, so they are easy to read. Some lists let you edit short fields directly in the table, as the risk list does (see section 8).

EterShield, an Eter Growth platform